POWERFUL PERMANENT ELECTROMAGNETIC CHUCK WITH VACUUM FUNCTION [Model EP-DV] CATALOG
Hybrid chuck to handle diversified materials !




EP-DV3060


Electro Chuck Master
EPS-D2100A
EPS-D2100A 		[Application]
Permanent electromagnetic chucks for cutting equipped with a grid-seal type vacuum chuck function added to hold workpieces during cutting and grinding of magnetic and nonmagnetic workpieces.

[Features]
  • The strong holding power makes these chucks suitable for cutting of magnetic materials.
  • Electricity is used only when mounting and demounting workpieces, thus minimal heat is generated and electricity is saved.
  • Since these chucks have a construction dedicated to demagnetization, they have good workpiece release performance when they are turned off.
  • The vacuum chuck can be set to a desired area by use of seal rubber according to workpieces.
  • When machining nonmagnetic workpieces, the permanent electromagnetic feature can be utilized to hold magnetic substances around them to secure them firmly.

Chuck controller and vacuum system required additionally


[mm(in)]
Model Mounting Size Work Face Pole Pitch Mounting Face Height Grid Pitch Effective Area Mass Electro Chuck Master Applicable Vacuum System
B1 L1 Le t B4 B2 L2 h H B3~L3
EP-DV3060 300(11.8)×600(23.6) 310
(12.2)		 638
(25.1)		 558
(21.9)		 35
(1.37)		 92
(3.62)		 42(2+8+2+30)
(1.65)		 304
(11.9)		 638
(25.1)		 20
(0.78)		 125
(4.92)		 42
(1.65)
×
42
(1.65)		 252(9.92)×
588(23.1)		 170kg/
374lb		 EPS-D2100A VPU-EG
VPU-E10
VPU-D20
EP-DV4080 400(15.7)×800(31.5) 410
(16.1)		 806
(31.7)		 726
(28.5)		 79
(3.11)		 404
(15.9)		 806
(31.7)		 378(14.8)×
756(29.7)		 280kg/
617lb
EP-DV50100 500(19.6)×1000(39.4) 510
(20.0)		 1058
(41.6)		 978
(38.5)		 87
(3.42)		 504
(19.8)		 1058
(41.6)		 462(18.1)×
1008(39.6)		 450kg/
992lb		 EPS-D2100A-2
※The chuck controller, vacuum system and clamp parts are not included.
※The KANETEC chucks work best when a KANETEC chuck controller is used.
※Turning the permanent electromagnetic chucks on and off must be limited to once per several minutes. If on/off operations are repeated frequently, the chucks may be damaged by overheat.