PERMANENT ELECTROMAGNETIC MICROPITCH CHUCK [Model EPTW-N] CATALOG




EPTW-N2040


 [Application]
Suitable for grinding of thin and small workpieces.

[Features]
  • Generates strong holding power on workpieces of □25 mm and larger.
  • Instead of the conventional magnetic pole longitudinal patterns, the transverse magnetic pole patterns are used.
  • A resin-bonded structural face plate having little environmental burden is employed.

Chuck controller required additionally


[mm(in)]
Model Nominal Size Work Face Pole Pitch Mounting Face Height Voltage Power
Cord		 Mass Electro
Chuck Master
B1 L1 t Le P B2 L2 h H
EPTW-N1530 150(5.90)×300(11.8) 150
(5.90)		 300
(11.8)		 25
(0.98)		 261
(10.2)		 4(1+3)
0.15
(0.04+0.11)		 148
(5.82)		 314
(12.3)		 20
(0.78)		 100
(3.93)		 180 VDC 2m
(78.7)		 30kg/
66lb		 EPS-W215B
EPTW-N1545 150(5.90)×450(17.7) 450
(17.7)		 397
(15.6)		 464
(18.2)		 45kg/
99lb
EPTW-N2040 200(7.87)×400(15.7) 200
(7.87)		 400
(15.7)		 349
(13.7)		 198
(7.79)		 414
(16.2)		 110
(4.33)		 52kg/
114lb
EPTW-N2050 200(7.87)×500(19.6) 500
(19.6)		 449
(17.6)		 514
(20.2)		 3m
(118)		 65kg/
143lb
EPTW-N2560 250(9.84)×600(23.6) 250
(9.84)		 600
(23.6)		 549
(21.6)		 246
(9.68)		 614
(24.1)		 107kg/
235lb
EPTW-N3060 300(11.8)×600(23.6) 300
(11.8)		 296
(11.6		 128kg/
282lb
※The chuck controller and clamp parts are not included.
※The KANETEC chucks work best when a KANETEC chuck controller is used.
※Turning the permanent electromagnetic chucks on and off must be limited to once per several minutes. If on/off operations are repeated frequently, the chucks may be damaged by overheat.