ELECTROMAGNETIC CHUCK WITH VACUUM CHUCK FUNCTION [Model KETV] CATALOG




KETV-3060F
[Application]
An Electromagnetic chuck with a vacuum chuck function of grid seal type added. The vacuum chuck function enables it to hold nonmagnetic workpieces also.
[Features]
  • The height has been reduced by 35 mm.
  • The vacuum chuck can be configured to a desired usage area using seal rubber.
  • Since vacuum is maintained by use of seal rubber, a high degree of vacuum can be maintained even when workpieces are slightly warped.
  • Usable in wet operations.
Chuck controller required additionally

Vacuum system required additionally

[mm(in)]
Model Nominal
Size		 Work Face Pole pitch Mounting Face Height Grid
Pitch		 Voltage Current Mass Applicable
Vacuum System
B1 L1 t Le1 Le2 L2 L3 Be B3 B4 P B2 h H
KETV-3060F 300(11.8) ×
600(23.6)		 300
(11.8)		 600
(23.6)		 30
(1.18)		 543
(21.3)		 580
(22.8)		 80
(3.14)		 240
(9.44)		 280
(11.0)		 60
(2.36)		 180
(7.08)		 20(3+17)
(0.78)		 290
(11.4)		 20
(0.78)		 90
(3.54)		 20
(0.78)
×
20
(0.78)		 90 VDC 1.3A 110kg/
242lb		 VPU-D20
VPU-E10
VPU-E20
KETV-4080F 400(15.7) ×
800(31.5)		 400
(15.7)		 800
(31.5)		 743
(29.2)		 780
(30.7)		 320
(12.5)		 380
(14.9)		 280
(11.0)		 390
(15.3)		 1.9A 190kg/
418lb
KETV-50100F 500(19.6) ×
1000(39.4)		 500
(19.6)		 1000
(39.4)		 943
(37.1)		 980
(38.5)		 440
(17.3)		 480
(18.8)		 380
(14.9)		 490
(7.08)		 2.3A 300kg/
661lb
KETV-60100F 600(23.6) ×
1000(39.4)		 600
(23.6)		 580
(22.8)		 480
(18.8)		 580
(19.2)		 3.4A 360kg/
793lb
*Seal rubber φ6, 10m is included. *The chuck controller and vacuum system are not included. *The KANETEC chucks work best when a KANETEC chuck controller is used.