SUPER POWERFUL PERMANENT ELECTROMAGNETIC CHUCK FOR LONG WORKPIECE [Model EP-QZ] CATALOG




EP-QZ8-1550A
An example of special fabrication
[Features]
  • The gap characteristic is superior to that of the current Model EP-QN/QS. These chucks are suitable for workpieces that have poor flatness and require large holding power.
  • These chucks replace conventional hydraulic and mechanical clamping to reduce the setup time and improve productivity.
  • The magnetic poles are arranged according to shapes and length of workpieces such as rails. Securing blocks specially designed according to workpiece shapes are also available.
  • A type with a separator made of brass is also available.

Chuck controller required additionally


[mm(in)]
Model Max. Holding Power per Pole Pole Size No. of Poles Features Electro Chuck Master
EP-QZ8-15100A □75(□2.95)  750kgf
□50(□1.96)  300kgf		 □75(□2.95) 5 Single type EPS-P2100B
EP-QZW-30100A □75(□2.95)+□50(□1.96) 10(□75)+14(□50) Double type EPS-P2100B-2
※The chuck controller and clamp parts are not included.
※The KANETEC chucks work best when a KANETEC chuck controller is used.
※Turning the permanent electromagnetic chucks on and off must be limited to once per several minutes. If on/off operations are repeated frequently, the chucks may be damaged by overheat.