EPB-1F2525A

An example of usage

[Application]
These blocks are designed for holding workpieces on such machines as machining centers and NC machine tools. Suitable for machining workpieces by 5-face machining centers, etc.
[Features]
By securing a workpiece overhanging, the 5-face machining center setup time can be shortened.
These blocks can be used in wet operations and therefore can be used like normal magnetic chucks.
Since these blocks are of permanent electromagnetic type, the holding power is not affected by power failure or cable breakage. Also since very little heat is generated, thermal influence on workpiece is minimal.
The metal connecting joint facilitates disconnection of the power cable. (Pallet change and external setup supported.)

[mm(in)]
Model	Dimensions	Height	Pole Size	Mass	Holding Power	Electro Chuck Master
EPB-1F1625A	160(6.29)x250(9.84)	150 (5.90)	70 (2.75)	40kg/88lb	11.8kN	EPS-P2100B
EPB-1F2525A	250(9.84)x250(9.84)			60kg/132lb	23.5kN
EPB-1F3333A	330(12.9)x330(12.9)			120kg/264lb	53kN
Turning the permanent electromagnetic chucks on and off must be limited to once per several minutes. If on/off operations are repeated frequently, the chucks may be damaged by overheat.