PERMANENT ELECTROMAGNETIC FLOATERTM [Model KF-Q] CATALOG
Permanent electromagnetic type introduced to FLOATER Series !



KF-Q10
(An example of special fabrication)




An example of separation of
steel plates



[Application]
Most suitable for remote control of ON and OFF of separation of steel plates.

[Features]
  • Compared with the electromagnetic type, this type has a wider magnetic force effective width.
  • Compared with the permanent magnetic cylinder changeover type that can be controlled remotely, this type requires much less space.
  • Compared with the electromagnetic type, this type consumes less electricity since electricity is supplied momentarily only for ON/OFF operation.
A special size is available also.
Rectifier required additionally

mm(in)
Model Dimensions Source Capacity Mass Applicable Rectifier
KF-Q10 W159(6.25)×D64(2.51)×H144(5.66) 1.5kVA 2.3kg/5.07lb ※KFQR-260A
※When themagnetization operation or demagnetization operation is performed five times successively per minute on the control unit, the unit will be brought into an alarm state and will not accept further operation for safety. To reset the alarm state, turn off the source power once and then turn it on again.