| MAGTAP™[Model MTP] | CATALOG |
 MTP-13B  An example of usage  MTP-MT8A |
[Application] A tool designed to facilitate tapping of prepared holes in iron and steel plates, secured with strong magnetic holding by the Magtap. Available in two models: permanent magnet and electromagnet. Tapping can be done either with a manual hand turning tapper, or an electric tapper. [Features] Provides a stable mounting position/posture, ensured by strong holding power, for easy tapping. MTP-13B <Manual tapping type>Small and light weight for easy transportation.The tap guide holder to facilitate accurate tapping in horizontal and vertical faces. Wear and damage of taps can be prevented. The magnet used is a strong permanent magnet. MTP-25A <Manual turn latchet type>Tapping can be done only by operating the latchet lever.The magnet used is a strong electromagnet. MTP-MT8A <Electric type>The revolution can be varied steplessly according to tap sizes.Small and light weight for easy transportation. When removed from the mounting fixture, the tapper becomes an electric drill. MTP-MT16 <Electric type>Speedy tapping can be achieved by the impact method.The back-forth and right-left adjusting mechanism is incorporated. When removed from the mounting fixture, the tapper becomes an electric drill. (The main unit is the same as Kanetec Magbore KCD-1NB, but the lock handle faces an opposite direction.) |